[f-nsp] Line Cards not Booting on NI-MLX-4

[Frankie John-Lewis]

Can you revert back to the previous working image?


Did you use a combined image when you upgraded?

Regards

Frankie

----- Original Message -----
From: foundry-nsp-bounces at puck.nether.net <foundry-nsp-bounces at puck.nether.net>
To: Tomasz Szewczyk <tomeks at man.poznan.pl>; Chuck Ufarley <markentime at gmail.com>
Cc: foundry-nsp at puck.nether.net <foundry-nsp at puck.nether.net>
Sent: Tue Aug 04 07:59:24 2009
Subject: Re: [f-nsp] Line Cards not Booting on NI-MLX-4

Try doing a reload-check to see if the files are ok.

Ronald


Met vriendelijke groet, With kind regards, 

Ronald Esveld
network engineer

Qi ict
Delftechpark 35-37
Postbus 402, 2600 AK Delft

T : +31 15 888 0 444
F : +31 15 888 0 445
E : mailto:ronald.esveld at qi.nl
I : http://www.qi.nl/

-----Oorspronkelijk bericht-----
Van: foundry-nsp-bounces at puck.nether.net
[mailto:foundry-nsp-bounces at puck.nether.net] Namens Tomasz Szewczyk
Verzonden: dinsdag 4 augustus 2009 8:55
Aan: Chuck Ufarley
CC: foundry-nsp at puck.nether.net
Onderwerp: Re: [f-nsp] Line Cards not Booting on NI-MLX-4

Hi,

What code version you used before upgrade? I had something similar when 
FPGA images on LPs were not compatible with IronWare version.

Tomek

Chuck Ufarley pisze:
> Hi all--
>
> I've got a couple of NI-MLX-1Gx20-SFPs that I'm trying to bring up on 
> an NI-MLX-MR running 4.00ca, and I can't get the cards to boot.  They 
> keep looping through a "CARD_STATE_BOOT" "CARD_STATE_SW_LOADED " 
> "CARD_STATE_SYNC_FID" loop, but won't come up active.  I can't update 
> the lp files unless the card comes up.  I've tried this:
>
> Config t
>  lp boot system interactive [slot#]
> exit
>  wr mem
> Power-off lp [slot#]
> Power-on lp [slot#]
> lp boot system mp primary [slot#]
>
> and the lp images load from the mp, but they don't seem to stick, 
> because the line card doesn't go active.
>
> Do I need to issue a "no lp boot system interactive" + new "wr mem" + 
> reload command to get it up and running?  It doesn't seem to work.  Am

> I missing something obvious.
>
> Help is extremely appreciated.  I'm a little stumped right now.
>
> Thanks.
>
> --Chuck
>
------------------------------------------------------------------------
>
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp
_______________________________________________
foundry-nsp mailing list
foundry-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/foundry-nsp
_______________________________________________
foundry-nsp mailing list
foundry-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/foundry-nsp

--------------------------------------------------------------------------------

This message is for information purposes only and is not intended as an 
offer, recommendation or solicitation to buy or sell, nor is it an official 
confirmation of terms. No representation or warranty is made that this 
information is complete or accurate. Any views or opinions expressed do not
necessarily represent those of ODL Securities Limited. This email and the 
information it contains may be confidential, proprietary or legally privileged. 
If you receive this message in error, please notify the sender and delete it
from your system. You must not, directly or indirectly, use, disclose, 
distribute, copy or store this message or any part of it if you are not the 
intended recipient. Unless otherwise stated, any pricing information given in 
this email is indicative only, is subject to changes and does not constitute 
an offer to deal at any price quoted. 

ODL Securities Limited is authorised and regulated by the Financial Services Authority.

--------------------------------------------------------------------------------

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20090804/0b01d165/attachment.html>