[f-nsp] WG: IPv6 on BigIron?

[Jeroen Wunnink]

You need the B2P08001x software, the B2R doesn't have IPv6 support

Gunther Stammwitz wrote:
> Hello Clement,
>
> which exact software tree are you referring to?
>
> I was trying to enable v6 on 8001u (08.0.01uT53 / B2R08001u.bin) but didn't
> have success.
> Is the B2R-image the correct version set? My modules are jetcore (J-BxGMR4).
>
>
> Can't find the appropriate manual :-( 
> The v6 manual from April (IPv6_April2009_Config_Guide.pdf) just says
> IronWare
> Software 07.7.02 and higher.
>
>
> Thanks,
> Gunther
>
> [apologies for dupes - had to send the message again due to spam protection]
>
>   
>> -----Ursprüngliche Nachricht-----
>> Von: foundry-nsp-bounces at puck.nether.net [mailto:foundry-nsp-
>> bounces at puck.nether.net] Im Auftrag von Clement Cavadore
>> Gesendet: Donnerstag, 8. Oktober 2009 00:55
>> An: Joseph Hardeman
>> Cc: foundry-nsp at puck.nether.net
>> Betreff: Re: [f-nsp] IPv6 on BigIron?
>>
>> Hi,
>>
>>
>> Le mercredi 07 octobre 2009 à 18:19 -0400, Joseph Hardeman a écrit :
>>     
>>> Yes, the J-BxGMR4 will do IPv6, but you need to have a software
>>> version greater than 08.0.x.
>>>       
>> More precisely: You need Jetcore module *and* software equals to 08.x.
>> 9.x or 7.x do not have any IPv6 features.
>>
>> However, Jetcore manager runs a fully software-based IPv6 routing.
>>
>> Regards,
>>
>> Clément
>>
>> _______________________________________________
>> foundry-nsp mailing list
>> foundry-nsp at puck.nether.net
>> http://puck.nether.net/mailman/listinfo/foundry-nsp
>>     
>
>
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp
>   

-- 

Met vriendelijke groet,

Jeroen Wunnink,
EasyHosting B.V. Systeembeheerder
systeembeheer at easyhosting.nl

telefoon:+31 (035) 6285455              Postbus 48
fax: +31 (035) 6838242                  3755 ZG Eemnes

http://www.easyhosting.nl
http://www.easycolocate.nl