[f-nsp] NI-MLX-1GX20-GC FID_DISTRIBUTION Error

[kgb]

You need use same version on MP and all LP modules!!!
sorry for my bad english
type show flash and see your versions
type show version and see your current version
type reload-check and see what happen too

make fun 

Mitko



On Monday 14 December 2009 20:42:43 Chuck Ufarley wrote:
> Hey Everybody--
> 
> I just got a series of the above cards, and I keep getting SYNC_FID errors
> and a looping reboot of the line cards (see below).  This has happened with
> three in a row, though I *can* get a previously working card to come up.  I
> tried booting interactive and syncing the mp with the lp, but the new cards
> still won't come up.  I'd rather not send them back, for obvious reasons.
> Am I missing some fix that I should know?
> 
> Here's the error:
> 
> Module down in slot 1, reason CARD_DOWN_REASON_FID_DISTRIBUTION_FAILED.
> Error Co
> de (0)
> Slot 1 is rebooted
> Download to Slot 1 is timed out
> 
> And the show module (with the working card up and running):
> 
> NetIron MLX-8 Router#sho mod
>         Module                             Status      Ports  Starting MAC
> M1 (left):
> M2 (right): NI-MLX-MR Management Module     Active
> F1: NI-X-SF Switch Fabric Module         Active
> F2: NI-X-SF Switch Fabric Module         Active
> S1: NI-MLX-1Gx20-GC 20-port 10/100/1000 Copper Module  CARD_STATE_BOOT
> 20   0
> 012.f29e.7b00
> S2:
> S3: NI-MLX-1Gx20-GC 20-port 10/100/1000 Copper Module  CARD_STATE_UP    20
> 001
> 2.f29e.7b60
> S4:
> S5:
> S6:
> S7:
> S8:
> 
> Thanks much.  Always appreciated.
> 
> --Chuck
>