[f-nsp] Determining throughput

[Jeroen Wunnink]

Try http://nfsen.sourceforge.net, uses sflow rather then SNMP to collect 
data, so has a lot more information on what kind of traffic is going out.


Chris Cameron wrote:
> How might I determine how much traffic we're pushing out to the
> internet through our BigIron RX-4?
>
> Using 'show interfaces ethernet 1/1' and looking at '300 second output
> rate:' doesn't seem to provide an accurate number as it's WAY lower
> than our load balancer says it's putting out to the internet.
>
>
> Thanks,
> Chris
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp
>   

-- 

Met vriendelijke groet,

Jeroen Wunnink,
EasyHosting B.V. Systeembeheerder
systeembeheer at easyhosting.nl

telefoon:+31 (035) 6285455              Postbus 48
fax: +31 (035) 6838242                  3755 ZG Eemnes

http://www.easyhosting.nl
http://www.easycolocate.nl