[f-nsp] WSM6-1 CPU App Crash + empty flash/boot

[Jonas Frey]

Hi,

i guess only thing you can do is hard reboot the box.
If you are unlucky the flash on the primary card has gone bad. Atleast
it reports it cant read the config nvram. 
Even if the first card is dead you still have the secondary...and it
should boot from that one. Make sure you have a backup of your config
tho.
Also that firmware is quite ancient....might be a good idea to upgrade
to atleast 9.5. 

Regards,
Jonas

On Mon, 2009-02-23 at 19:41, Chuck Ufarley wrote:
> My WSM6-1 card blanked out with a WSM CPU crash, and now the code
> won't reload on the WSM module.  I'm afraid to restart it and find a
> brick.  Below is the console output for the process.  Every time I try
> to load on a new WSM code, the transfer only goes to the secondary
> management card.  Also , the subsystem lights on the front only flash
> for the secondary mgt, though the output states that the primary is
> active. Removing the secondary card doesn't cause any shutdown.
> 
> Help greatly appreciated.  Here's the output:
> 
> SLB-ServerIron#sho fla
> Active management module:
> Code Flash Type: AMD 29LV033C, Size: 64 * 65536 = 4194304, Unit: 4
> Boot Flash Type: AMD 29LV040B, Size: 8 * 65536 = 524288
> Compressed Pri Code size = 3869358, Version 09.4.00mTD2
> (WXM09400m.bin)
> Compressed Sec Code size = 3934578, Version 09.4.00yTD2
> (WXM09400y.bin)
> Maximum Code Image Size Supported: 7011840 (0x006afe00)
> Boot Image size = 270912, Version 07.06.54 (wsm-b54.bin)
> INFO: empty config data in the primary area, try to read from backup
> INFO: empty config data in the backup area also
> Configuration Data  Flash is empty.
> Used Configuration Flash Size=0, Max Configuration Flash Size=327680.
> 
> Standby management module:
> Code Flash Type: AMD 29LV033C, Size: 64 * 65536 = 4194304, Unit: 4
> Boot Flash Type: AMD 29LV040B, Size: 8 * 65536 = 524288
> Compressed Pri Code size = 3869358, Version 09.4.00mTD2
> (WXM09400m.bin)
> Compressed Sec Code size = 3934578, Version 09.4.00yTD2
> (WXM09400y.bin)
> Maximum Code Image Size Supported: 7011840 (0x006afe00)
> Boot Image Version 07.06.54 (wsm-b54.bin)
> 
> WSM module slot 1 CPU 1:
> Code Flash Type: AMD , Size: 0 * 0 = 0
> Boot Flash Type: AMD , Size: 0 * 0 = 0
> Compressed Pri Code: size = 0 Version
> Compressed Sec Code: size = 0 Version
> Maximum Code Image Size Supported: 0 (0x00000000)
> Boot Image size = 0 Version
> Maximum Boot Image Size Supported: 0 (0x00000000)
> 
> WSM module slot 2 CPU 1:
> Code Flash Type: AMD 29LV033C, Size: 64 * 65536 = 4194304
> Boot Flash Type: AMD 29LV040B, Size: 8 * 65536 = 524288
> Compressed Pri Code: size = 1632640 Version 09.4.00mTF2
> Compressed Sec Code: size = 1632640 Version 09.4.00mTF2
> Maximum Code Image Size Supported: 2096640 (0x001ffe00)
> Boot Image size = 57444 Version 07.06.54 (wsp-b54.bin)
> Maximum Boot Image Size Supported: 458752 (0x00070000)
> SLB-ServerIron#sho fla
> Active management module:
> Code Flash Type: AMD 29LV033C, Size: 64 * 65536 = 4194304, Unit: 4
> Boot Flash Type: AMD 29LV040B, Size: 8 * 65536 = 524288
> Compressed Pri Code size = 3869358, Version 09.4.00mTD2
> (WXM09400m.bin)
> Compressed Sec Code size = 3934578, Version 09.4.00yTD2
> (WXM09400y.bin)
> Maximum Code Image Size Supported: 7011840 (0x006afe00)
> Boot Image size = 270912, Version 07.06.54 (wsm-b54.bin)
> INFO: empty config data in the primary area, try to read from backup
> INFO: empty config data in the backup area also
> Configuration Data  Flash is empty.
> Used Configuration Flash Size=0, Max Configuration Flash Size=327680.
> 
> Standby management module:
> Code Flash Type: AMD 29LV033C, Size: 64 * 65536 = 4194304, Unit: 4
> Boot Flash Type: AMD 29LV040B, Size: 8 * 65536 = 524288
> Compressed Pri Code size = 3869358, Version 09.4.00mTD2
> (WXM09400m.bin)
> Compressed Sec Code size = 3934578, Version 09.4.00yTD2
> (WXM09400y.bin)
> Maximum Code Image Size Supported: 7011840 (0x006afe00)
> Boot Image Version 07.06.54 (wsm-b54.bin)
> 
> WSM module slot 1 CPU 1:
> Code Flash Type: AMD , Size: 0 * 0 = 0
> Boot Flash Type: AMD , Size: 0 * 0 = 0
> Compressed Pri Code: size = 0 Version
> Compressed Sec Code: size = 0 Version
> Maximum Code Image Size Supported: 0 (0x00000000)
> Boot Image size = 0 Version
> Maximum Boot Image Size Supported: 0 (0x00000000)
> 
> WSM module slot 2 CPU 1:
> Code Flash Type: AMD 29LV033C, Size: 64 * 65536 = 4194304
> Boot Flash Type: AMD 29LV040B, Size: 8 * 65536 = 524288
> Compressed Pri Code: size = 1632640 Version 09.4.00mTF2
> Compressed Sec Code: size = 1632640 Version 09.4.00mTF2
> Maximum Code Image Size Supported: 2096640 (0x001ffe00)
> Boot Image size = 57444 Version 07.06.54 (wsp-b54.bin)
> Maximum Boot Image Size Supported: 458752 (0x00070000)
> SLB-ServerIron#sho ver
>   SW: Version 09.4.00mTD2 Copyright (c) 1996-2003 Foundry Networks,
> Inc.
>       Compiled on May 03 2006 at 20:38:33 labeled as WXM09400m
>       (3869358 bytes) from Primary WXM09400m.bin
>   HW: ServerIronGT E-1 Switch, SYSIF version 21, Serial #: Non-exist
> ==========================================================================
> SL 1: B0GMR WSM6 Management Module, SYSIF 2, M6, ACTIVE
>       Serial #:   CH17061827
> App CPU's in the process of coming up!
> 16384 KB BRAM, SMC version 5, BM version 21
> ==========================================================================
> SL 2: B0GMR WSM6 Management Module, SYSIF 2, M6, STANDBY
>       Serial #:   CH50050072
>     0 MB SHM, 1 Application Processors
> 16384 KB BRAM, SMC version 5, BM version 21
>   SW: (1)09.4.00mTF2
> ==========================================================================
> SL 3: J-BxG2 JetCore Gig Fiber Module, SYSIF 2 (Mini GBIC)
>       Serial #:   CX04050362
>  4096 KB BRAM, JetCore ASIC IGC version 49, BIA version 8a
> 32768 KB PRAM and 2M-Bit*1 CAM for IGC  8, version 0449
> ==========================================================================
> SL 4: J-BxGC16 JetCore Gig Copper Module, SYSIF 2
>       Serial #:   CH05060646
>  4096 KB BRAM, JetCore ASIC IGC version 49, BIA version 8a
> 32768 KB PRAM and 2M-Bit*1 CAM for IGC 12, version 0449
> 32768 KB PRAM and 2M-Bit*1 CAM for IGC 13, version 0449
> 32768 KB PRAM and 2M-Bit*1 CAM for IGC 14, version 0449
> 32768 KB PRAM and 2M-Bit*1 CAM for IGC 15, version 0449
> ==========================================================================
> Active management module:
>   1.0 GHz Power PC processor 750GX (version 7002/0102) 66 MHz bus
>   512 KB boot flash memory
> 16384 KB code flash memory
>   512 KB SRAM
>   512 MB DRAM
> Standby management module:
>   1.0 GHz Power PC processor 750GX (version 7002/0102) 66 MHz bus
>   512 KB boot flash memory
> 16384 KB code flash memory
>   512 KB SRAM
>   512 MB DRAM
> The system uptime is 55 minutes 40 seconds
> The system : started=cold start
> 
> SLB-ServerIron#wsm copy tftp fla 192.168.0.35 wsp-b54.bin boot
> SLB-ServerIron#Programming WSM module flash at slot 2, please wait ...
> 
> WSM module 2 flash operation done
> 
> SLB-ServerIron#
> 
> 
> ______________________________________________________________________
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp