[f-nsp] WSM6-1 CPU App Crash + empty flash/boot
Chuck Ufarley
markentime at gmail.com
Mon Feb 23 15:30:25 EST 2009
It's funny--
I removed the secondary and tried to upgrade the firmware to 9.5. Here's
the sho fla oputput on that one, now:
ServerIronGT E-1#sho fla
Active management module:
Code Flash Type: AMD 29LV033C, Size: 64 * 65536 = 4194304, Unit: 4
Boot Flash Type: AMD 29LV040B, Size: 8 * 65536 = 524288
Compressed Pri Code size = 5246093, Version 09.5.02pTD4 (WXR09502p.bin)
Compressed Sec Code size = 3934578, Version 09.4.00yTD2 (WXM09400y.bin)
Maximum Code Image Size Supported: 6946304 (0x0069fe00)
Boot Image size = 292752, Version 09.05.02 (m2b09502.bin)
Used Configuration Flash Size=221, Max Configuration Flash Size=327680.
WSM module slot 1 CPU 1:
Code Flash Type: , Size: 0 * 0 = 0
Boot Flash Type: , Size: 0 * 0 = 0
Compressed Pri Code: size = 0 Version
Compressed Sec Code: size = 0 Version
Maximum Code Image Size Supported: 0 (0x00000000)
Boot Image size = 0 Version
Maximum Boot Image Size Supported: 0 (0x00000000)
ServerIronGT E-1#
Note that the flash got burnt on this one, too.
Anyone got any suggestions?
Thanks much.
On Mon, Feb 23, 2009 at 11:37 AM, Jonas Frey <jf at probe-networks.de> wrote:
> Hi,
>
> i guess only thing you can do is hard reboot the box.
> If you are unlucky the flash on the primary card has gone bad. Atleast
> it reports it cant read the config nvram.
> Even if the first card is dead you still have the secondary...and it
> should boot from that one. Make sure you have a backup of your config
> tho.
> Also that firmware is quite ancient....might be a good idea to upgrade
> to atleast 9.5.
>
> Regards,
> Jonas
>
> On Mon, 2009-02-23 at 19:41, Chuck Ufarley wrote:
> > My WSM6-1 card blanked out with a WSM CPU crash, and now the code
> > won't reload on the WSM module. I'm afraid to restart it and find a
> > brick. Below is the console output for the process. Every time I try
> > to load on a new WSM code, the transfer only goes to the secondary
> > management card. Also , the subsystem lights on the front only flash
> > for the secondary mgt, though the output states that the primary is
> > active. Removing the secondary card doesn't cause any shutdown.
> >
> > Help greatly appreciated. Here's the output:
> >
> > SLB-ServerIron#sho fla
> > Active management module:
> > Code Flash Type: AMD 29LV033C, Size: 64 * 65536 = 4194304, Unit: 4
> > Boot Flash Type: AMD 29LV040B, Size: 8 * 65536 = 524288
> > Compressed Pri Code size = 3869358, Version 09.4.00mTD2
> > (WXM09400m.bin)
> > Compressed Sec Code size = 3934578, Version 09.4.00yTD2
> > (WXM09400y.bin)
> > Maximum Code Image Size Supported: 7011840 (0x006afe00)
> > Boot Image size = 270912, Version 07.06.54 (wsm-b54.bin)
> > INFO: empty config data in the primary area, try to read from backup
> > INFO: empty config data in the backup area also
> > Configuration Data Flash is empty.
> > Used Configuration Flash Size=0, Max Configuration Flash Size=327680.
> >
> > Standby management module:
> > Code Flash Type: AMD 29LV033C, Size: 64 * 65536 = 4194304, Unit: 4
> > Boot Flash Type: AMD 29LV040B, Size: 8 * 65536 = 524288
> > Compressed Pri Code size = 3869358, Version 09.4.00mTD2
> > (WXM09400m.bin)
> > Compressed Sec Code size = 3934578, Version 09.4.00yTD2
> > (WXM09400y.bin)
> > Maximum Code Image Size Supported: 7011840 (0x006afe00)
> > Boot Image Version 07.06.54 (wsm-b54.bin)
> >
> > WSM module slot 1 CPU 1:
> > Code Flash Type: AMD , Size: 0 * 0 = 0
> > Boot Flash Type: AMD , Size: 0 * 0 = 0
> > Compressed Pri Code: size = 0 Version
> > Compressed Sec Code: size = 0 Version
> > Maximum Code Image Size Supported: 0 (0x00000000)
> > Boot Image size = 0 Version
> > Maximum Boot Image Size Supported: 0 (0x00000000)
> >
> > WSM module slot 2 CPU 1:
> > Code Flash Type: AMD 29LV033C, Size: 64 * 65536 = 4194304
> > Boot Flash Type: AMD 29LV040B, Size: 8 * 65536 = 524288
> > Compressed Pri Code: size = 1632640 Version 09.4.00mTF2
> > Compressed Sec Code: size = 1632640 Version 09.4.00mTF2
> > Maximum Code Image Size Supported: 2096640 (0x001ffe00)
> > Boot Image size = 57444 Version 07.06.54 (wsp-b54.bin)
> > Maximum Boot Image Size Supported: 458752 (0x00070000)
> > SLB-ServerIron#sho fla
> > Active management module:
> > Code Flash Type: AMD 29LV033C, Size: 64 * 65536 = 4194304, Unit: 4
> > Boot Flash Type: AMD 29LV040B, Size: 8 * 65536 = 524288
> > Compressed Pri Code size = 3869358, Version 09.4.00mTD2
> > (WXM09400m.bin)
> > Compressed Sec Code size = 3934578, Version 09.4.00yTD2
> > (WXM09400y.bin)
> > Maximum Code Image Size Supported: 7011840 (0x006afe00)
> > Boot Image size = 270912, Version 07.06.54 (wsm-b54.bin)
> > INFO: empty config data in the primary area, try to read from backup
> > INFO: empty config data in the backup area also
> > Configuration Data Flash is empty.
> > Used Configuration Flash Size=0, Max Configuration Flash Size=327680.
> >
> > Standby management module:
> > Code Flash Type: AMD 29LV033C, Size: 64 * 65536 = 4194304, Unit: 4
> > Boot Flash Type: AMD 29LV040B, Size: 8 * 65536 = 524288
> > Compressed Pri Code size = 3869358, Version 09.4.00mTD2
> > (WXM09400m.bin)
> > Compressed Sec Code size = 3934578, Version 09.4.00yTD2
> > (WXM09400y.bin)
> > Maximum Code Image Size Supported: 7011840 (0x006afe00)
> > Boot Image Version 07.06.54 (wsm-b54.bin)
> >
> > WSM module slot 1 CPU 1:
> > Code Flash Type: AMD , Size: 0 * 0 = 0
> > Boot Flash Type: AMD , Size: 0 * 0 = 0
> > Compressed Pri Code: size = 0 Version
> > Compressed Sec Code: size = 0 Version
> > Maximum Code Image Size Supported: 0 (0x00000000)
> > Boot Image size = 0 Version
> > Maximum Boot Image Size Supported: 0 (0x00000000)
> >
> > WSM module slot 2 CPU 1:
> > Code Flash Type: AMD 29LV033C, Size: 64 * 65536 = 4194304
> > Boot Flash Type: AMD 29LV040B, Size: 8 * 65536 = 524288
> > Compressed Pri Code: size = 1632640 Version 09.4.00mTF2
> > Compressed Sec Code: size = 1632640 Version 09.4.00mTF2
> > Maximum Code Image Size Supported: 2096640 (0x001ffe00)
> > Boot Image size = 57444 Version 07.06.54 (wsp-b54.bin)
> > Maximum Boot Image Size Supported: 458752 (0x00070000)
> > SLB-ServerIron#sho ver
> > SW: Version 09.4.00mTD2 Copyright (c) 1996-2003 Foundry Networks,
> > Inc.
> > Compiled on May 03 2006 at 20:38:33 labeled as WXM09400m
> > (3869358 bytes) from Primary WXM09400m.bin
> > HW: ServerIronGT E-1 Switch, SYSIF version 21, Serial #: Non-exist
> >
> ==========================================================================
> > SL 1: B0GMR WSM6 Management Module, SYSIF 2, M6, ACTIVE
> > Serial #: CH17061827
> > App CPU's in the process of coming up!
> > 16384 KB BRAM, SMC version 5, BM version 21
> >
> ==========================================================================
> > SL 2: B0GMR WSM6 Management Module, SYSIF 2, M6, STANDBY
> > Serial #: CH50050072
> > 0 MB SHM, 1 Application Processors
> > 16384 KB BRAM, SMC version 5, BM version 21
> > SW: (1)09.4.00mTF2
> >
> ==========================================================================
> > SL 3: J-BxG2 JetCore Gig Fiber Module, SYSIF 2 (Mini GBIC)
> > Serial #: CX04050362
> > 4096 KB BRAM, JetCore ASIC IGC version 49, BIA version 8a
> > 32768 KB PRAM and 2M-Bit*1 CAM for IGC 8, version 0449
> >
> ==========================================================================
> > SL 4: J-BxGC16 JetCore Gig Copper Module, SYSIF 2
> > Serial #: CH05060646
> > 4096 KB BRAM, JetCore ASIC IGC version 49, BIA version 8a
> > 32768 KB PRAM and 2M-Bit*1 CAM for IGC 12, version 0449
> > 32768 KB PRAM and 2M-Bit*1 CAM for IGC 13, version 0449
> > 32768 KB PRAM and 2M-Bit*1 CAM for IGC 14, version 0449
> > 32768 KB PRAM and 2M-Bit*1 CAM for IGC 15, version 0449
> >
> ==========================================================================
> > Active management module:
> > 1.0 GHz Power PC processor 750GX (version 7002/0102) 66 MHz bus
> > 512 KB boot flash memory
> > 16384 KB code flash memory
> > 512 KB SRAM
> > 512 MB DRAM
> > Standby management module:
> > 1.0 GHz Power PC processor 750GX (version 7002/0102) 66 MHz bus
> > 512 KB boot flash memory
> > 16384 KB code flash memory
> > 512 KB SRAM
> > 512 MB DRAM
> > The system uptime is 55 minutes 40 seconds
> > The system : started=cold start
> >
> > SLB-ServerIron#wsm copy tftp fla 192.168.0.35 wsp-b54.bin boot
> > SLB-ServerIron#Programming WSM module flash at slot 2, please wait ...
> >
> > WSM module 2 flash operation done
> >
> > SLB-ServerIron#
> >
> >
> > ______________________________________________________________________
> > _______________________________________________
> > foundry-nsp mailing list
> > foundry-nsp at puck.nether.net
> > http://puck.nether.net/mailman/listinfo/foundry-nsp
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20090223/08759450/attachment.html>
More information about the foundry-nsp
mailing list