[f-nsp] Question about MLX/XMR capabilities

[Tomasz Szewczyk]

Colin,

Rate-limit is different feature than traffic shaping. You can apply VALN 
based RL, but as far as I know on XMRs it is not possible for traffic 
shaping. Traffic shaping can be applied only per-port.

Tomek
>
> If you then wish to rate-limit all traffic associated with this 
> sub-interface, in this case VLAN 100 traffic you can perform the 
> following on interface 4/5.
>
> The below example rate-limits VLAN 100 to 100Kbps with a 10Kbps burst.
>
> interface ethernet 4/5
>   rate-limit input vlan-id 100 100000 10000
>   rate-limit output vlan-id 100 100000 10000
>