[f-nsp] Question about MLX/XMR capabilities

[Colin Horsington]

Tomek,

That is true, but my assumption was that he Allan wanted to simply  
limit customer IP traffic.  You can apply the shaping per queue as well.

Colin


On 28/01/2009, at 6:37 PM, Tomasz Szewczyk wrote:

> Colin,
>
> Rate-limit is different feature than traffic shaping. You can apply  
> VALN based RL, but as far as I know on XMRs it is not possible for  
> traffic shaping. Traffic shaping can be applied only per-port.
>
> Tomek
>>
>> If you then wish to rate-limit all traffic associated with this sub- 
>> interface, in this case VLAN 100 traffic you can perform the  
>> following on interface 4/5.
>>
>> The below example rate-limits VLAN 100 to 100Kbps with a 10Kbps  
>> burst.
>>
>> interface ethernet 4/5
>>  rate-limit input vlan-id 100 100000 10000
>>  rate-limit output vlan-id 100 100000 10000
>>
>