[f-nsp] SX-FI424HF not coming online

[jith]

Hi,
We were these kind of issues with the PoE modules which we loaded on to the
SX1600. Try with different slots as suggested by Jared.  It might be a
problem with the line card.  We replaced nearly 10nos. of line card(PoE) due
to firmware issues with SX series which was reporting false indications.

I think this is quite common. Can you paste your "show chassis" or "show
system" command output also "show modules" if it supported.

Better to raise a TAC request with the "show tech-support" output so that
your case will close ASAP for a replacement

Thanks
-Jith

On Thu, Jun 25, 2009 at 10:11 PM, Chuck Ufarley <markentime at gmail.com>wrote:

> Hey everybody--
>
> You guys are always so consistently helpful, I thought I'd try this one
> out.
>
> I've got this SX-FI424HF I'm trying to bring up on an FI-SX-4 with an
> SX-F112GM-4-PREM management card, and the thing won't even come online
> (output below).  I'm wondering if the mgmt card doesn't support the line
> card.  Secondly, it doesn't say "HF" anywhere on the blade.  Is there any
> way to confirm the HF status from the markings on the outside?  Last
> (obviously), does anyone have any insight or advice on the ouput below?
>
> FastIron SuperX Router#M:6 L:0 - ERROR: i2c MUX select failed, MUX address
> = 74,
>  channel = 5, offset = 0, status = -1
> stack: 4080 5A15E4 5A4C50 B711D8 B7135C B71700 B86650 54B578 54C690 48B8
> Error : System failed to detect all the devices on this module (1,2,1)
> Module 1 Init failed
> Err: Enabling module 1 Failed
> [1]Retrying ..
> Error : System failed to detect all the devices on this module (1,2,1)
> Module 1 Init failed
> Err: Enabling module 1 Failed
> [2]Retrying ..
> Error : System failed to detect all the devices on this module (1,2,1)
> Module 1 Init failed
> Err: Enabling module 1 Failed
> [3]Retrying ..
> Error : System failed to detect all the devices on this module (1,2,1)
> Module 1 Init failed
> Err: Enabling module 1 Failed
> Taking down module 1 ...
> Module 1 is now deleted
> Powering off the module in slot 1
>
> Thanks in advance, everybody.  Your insight is always appreciated.
>
> --Chuck
>
>
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp
>



-- 
-Sujith
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20090629/7a382fad/attachment.html>