[f-nsp] help on QOS for ip phones

[Lazuardi Nasution]

Hi Francois,

You still have to define the priority. VLAN Voice feature is only for
separating the Voice traffic automatically on the interface without 802.1Q

Best regards,

On Thu, Oct 15, 2009 at 12:22 AM, <francois.viau at rrsss16.gouv.qc.ca> wrote:

>
> Thanks but by setting that vlan to voice vlan will it set the priority to
> the highest ? or I should add an access-list with the proper dscp value ?
>
> thanks
>
>
>
>
>
>
> Francois Viau
>
>
>   *Lazuardi Nasution <mrxlazuardin at gmail.com>@puck.nether.net*
> Envoyé par : foundry-nsp-bounces at puck.nether.net
>
> 2009-10-14 12:57
>    A
> foundry-nsp at puck.nether.net  cc
>   Objet
>  Re: [f-nsp] help on QOS for ip phones
>
>
>
>
>
>
>
> Hi Francois,
>
> On FES4802, there is Voice VLAN. I think you can use it on your case and
> setting the suitable DSCP value for Voice VLAN. With CDP your IP Phones can
> request the Voice VLAN ID configured on the connected port automatically.
>
> Best regards,
>
>
> From: *francois.viau at rrsss16.gouv.qc.ca*<francois.viau at rrsss16.gouv.qc.ca>
> To: Eric Helm <*helmwork at ruraltel.net* <helmwork at ruraltel.net>>
> Date: Wed, 14 Oct 2009 08:01:23 -0400
> Subject: Re: [f-nsp] help on QOS for ip phones
>
> Most of it are FES-4802-POE
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20091015/03eea41a/attachment.html>