[f-nsp] keep-alive over active/active link

[Niels Bakker]

* lists.accounts at gmail.com (Mike Lott) [Wed 16 Sep 2009, 00:56 CEST]:
>In order to have keep-alives purely over that trunk as opposed to 
>going through the CORE, would I enter the following on _both_ 
>Serverirons?
>
>(config)#link-keepalive ethernet 2/5 ethernet 2/6
>
>The documentation of the code base I am running is a little sparse and 
>all I can find on this is in the document "Foundry Switch and Router 
>Installation and Basic Configuration Guide" where it talks about 
>configuring UDLD. Apologies, but I am a little confused.

"link-keepalive" is how one configures UDLD on an interface.  It has to 
be enabled on both sides to work, and it's Foundry proprietary.

This is distinct from keepalives sent between two load-balancers. 
Hopefully another poster can point you at that, if it's possible at all.


	-- Niels.

--