[f-nsp] keep-alive over active/active link

[Mike Lott]

Hey Niels

Thanks for that. Hopefully someone will shed some light on this :)

Mike

2009/9/16 Niels Bakker <niels=foundry-nsp at bakker.net>:
> * lists.accounts at gmail.com (Mike Lott) [Wed 16 Sep 2009, 00:56 CEST]:
>>
>> In order to have keep-alives purely over that trunk as opposed to going
>> through the CORE, would I enter the following on _both_ Serverirons?
>>
>> (config)#link-keepalive ethernet 2/5 ethernet 2/6
>>
>> The documentation of the code base I am running is a little sparse and all
>> I can find on this is in the document "Foundry Switch and Router
>> Installation and Basic Configuration Guide" where it talks about configuring
>> UDLD. Apologies, but I am a little confused.
>
> "link-keepalive" is how one configures UDLD on an interface.  It has to be
> enabled on both sides to work, and it's Foundry proprietary.
>
> This is distinct from keepalives sent between two load-balancers. Hopefully
> another poster can point you at that, if it's possible at all.
>
>
>        -- Niels.
>
> --
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp
>