[f-nsp] MLX spec

[Vladimir Litovka]

Colleagues, hi again

I need an MLX-8 with redundant route processor, switch fabric and power;
seven 10Gx4 linecards and single 20-port GE/SFP.

Whether the following spec correct and confirm these requirements? -

NI-MLX-8-AC (NI MLX 8-SLOT CHASSIS, 1 MR, 2 SF3, 2 AC) :: 1
NI-MLX-MR (NI MLX MANAGEMENT MODULE) :: 1
NI-MLX-10GX4 (NI MLX 4-PORT 10GE) :: 7
NI-MLX-1GX20-SFP (NetIron MLX Series 20-port FE/GE (100/1000)) :: 1

Also, whether these are correct transceivers for TGE and GE linecards? -

10G-XFP-LR (OPTIC, 10GBE, LR, XFP, SMF, LC CONNECTOR)
E1MG-LX (1000BaseLX SFP optic SMF, LC connector)

and is it mandatory to use Brocade's own transceivers (as Cisco requires) or
it's ok to use anything?

Thank you

-- 
/doka

/*-- http://doka-ua.blogspot.com/ --*/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20100428/34081125/attachment.html>