[f-nsp] MLX spec

Michiel Muhlenbaumer michiel.muhlenbaumer at atratoip.net
Tue Apr 27 18:39:41 EDT 2010


Hi,

> Colleagues, hi again
> 
> I need an MLX-8 with redundant route processor, switch fabric and power; seven 10Gx4 linecards and single 20-port GE/SFP.
> 
> Whether the following spec correct and confirm these requirements? -
> 
> NI-MLX-8-AC (NI MLX 8-SLOT CHASSIS, 1 MR, 2 SF3, 2 AC) :: 1
> NI-MLX-MR (NI MLX MANAGEMENT MODULE) :: 1
> NI-MLX-10GX4 (NI MLX 4-PORT 10GE) :: 7
> NI-MLX-1GX20-SFP (NetIron MLX Series 20-port FE/GE (100/1000)) :: 1
> 
> Also, whether these are correct transceivers for TGE and GE linecards? -
> 
> 10G-XFP-LR (OPTIC, 10GBE, LR, XFP, SMF, LC CONNECTOR)
> E1MG-LX (1000BaseLX SFP optic SMF, LC connector)
> 
> and is it mandatory to use Brocade's own transceivers (as Cisco requires) or it's ok to use anything?

All correct, and no, you dont have to use Brocade's own receivers.

Best regards,

Michiel Muhlenbaumer
Atrato IP Networks







More information about the foundry-nsp mailing list