[f-nsp] Link-Keepalive broken on bigron after upgrading to 8.0.0.1v

[Gunther Stammwitz]

Hello colleagues,

after upgrading from 08.0.01u to 08.0.01v we are suffering from a problem
with the link-keepalive-feature on bigirons:
We can no longer activate link-keepalive on ports that have tagged vlans
configured.

The error seems to be specific to ports 18 to 24 on a fe-tx-module (all of
the ports, some of them or only a single one) only.

Following error message occur while trying to assign link-keepalive to a
port when a port within the range of 18-24 is in tagged mode in a vlan:
Error: "link-keepalive and trunk threshold cannot be enabled in the same
interface".

As we are not using any trunks the message doesn't really make sense.
If foundry is referring to a port with tagged vlans on it as "trunk"?
What's a trunk threshold anyway?  I didn't configure that feature..

The first occurrence was after updating the firmware from 08.0.01u to
08.0.01v - before everything was fine and I could use link-keepalive on
tagged ports.

Has anyone else seen the same error?

Gunther