[f-nsp] Dual-Mode vlan id

[Sujith]

On Sat, Jul 31, 2010 at 5:39 AM, Gary H <ciscovoiper at gmail.com> wrote:

> I'm using Dual-Mode on user interfaces and I didn't assign a vlan id so it
> is using the DEFAULT-VLAN.
>
> I have voice traffic assigned with voice-vlan ##.
>
> My trunk carries the voice traffic but the data get stuck somewhere. Does
> the Dual-Mode need to be assigned a vlan id so that it can be a tagged trunk
> port member because DEFAULT-VLAN no longer has the port available once it
> gets added to the voice vlan as a tagged port.
>

Yes you should. Are you doing any inter-Vlan routing? Configure some data
Vlan and trunk it to the interface and your problem will get resolved.

Thanks
-Sujith
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20100731/0e5a8f9b/attachment.html>