[f-nsp] ve in VPLS on NetIron XMR?

[Romain DEGEZ]

------- Original message -------
> From: Mike Hughes <mike at linx.net>
> To: foundry-nsp at puck.nether.net
> Sent: 15.6.'10,  20:46
>
> --On 15 June 2010 13:42 -0500 Brad Fleming <bdflemin at gmail.com> wrote:
>
>> We're running IronWare 4.0.0.1d on NetIron XMRs. Is it possible to tie a
>> local VE into a VPLS without looping ports together?
>>
>> Based upon the ConfigGuide, I don't think its possible without looping
>> ports but I thought I'd ask... figure some of you all have been down 
>> this
>> road and know the answer already.
>
> VEs into VPLS should be supported in 5.0.0 and later.

Mpls interface on vlan is supported since 5.0.0, not VEs into VPLS/VLL.

>From the information I have , Brocade is currently 'studying the 
feasability' for Q1-2011 (without certitude as it may be a hardware 
limitation).

regards