[f-nsp] ve in VPLS on NetIron XMR?

[Eric Roach]

The only way I know of is to crossover the ports. Have one of the ports in the default vlan configuration and the other in vpls tag port. Then you can associate the ve to the vlan in the default global configuration.

eric

--- On Tue, 6/15/10, Mike Hughes <mike at linx.net> wrote:

> From: Mike Hughes <mike at linx.net>
> Subject: Re: [f-nsp] ve in VPLS on NetIron XMR?
> To: foundry-nsp at puck.nether.net
> Date: Tuesday, June 15, 2010, 1:46 PM
> --On 15 June 2010 13:42 -0500 Brad
> Fleming <bdflemin at gmail.com>
> wrote:
> 
> > We're running IronWare 4.0.0.1d on NetIron XMRs. Is it
> possible to tie a
> > local VE into a VPLS without looping ports together?
> > 
> > Based upon the ConfigGuide, I don't think its possible
> without looping
> > ports but I thought I'd ask... figure some of you all
> have been down this
> > road and know the answer already.
> 
> VEs into VPLS should be supported in 5.0.0 and later.
> 
> Mike
> -- 
> Mike Hughes     Chief Technical
> Officer  London Internet Exchange Ltd.
> mike at linx.net   http://www.linx.net/     
> Registered in England 3137929 at Trinity Court,
> Peterborough, PE1 1DA
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp
>