[f-nsp] Multi Trunking separate VLANs between 2 switches

[Gary H]

I can't find an example of multi trunking VLANs between two switches to
maximize Group1 and Group2 8GB trunk per vlan. Think this will work? (proper
syntax not used) Is the Group2 trunk going to require tagged trunk ports and
as a result, carry all the VLANs and then create a loop?

VLAN 1 (default vlan) contains dual mode ports, but trunk shouldn't need
dual mode

SWITCH A TRUNK Group1
e1/2 to 1/4
e2/1 to 2/4

SWITCH B TRUNK Group1
e1/2 to 1/4
e2/1 to 2/4


VLAN 2 contains tagged ports and untagged ports and IP Subnet voice traffic

SWITCH A TRUNK Group2
e1/5 to 1/8
e2/5 to 2/8

SWITCH B TRUNK Group2
e1/5 to 1/8
e2/5 to 2/8

Thank you
Gary
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20100319/98361470/attachment.html>