[f-nsp] Multi Trunking separate VLANs between 2 switches

[Gary H]

Port typo corrected in group1

SWITCH A TRUNK Group1
e1/1 to 1/4
e2/1 to 2/4

SWITCH B TRUNK Group1
e1/1 to 1/4
e2/1 to 2/4


On Fri, Mar 19, 2010 at 4:49 PM, Gary H <ciscovoiper at gmail.com> wrote:

> I can't find an example of multi trunking VLANs between two switches to
> maximize Group1 and Group2 8GB trunk per vlan. Think this will work? (proper
> syntax not used) Is the Group2 trunk going to require tagged trunk ports and
> as a result, carry all the VLANs and then create a loop?
>
> VLAN 1 (default vlan) contains dual mode ports, but trunk shouldn't need
> dual mode
>
> SWITCH A TRUNK Group1
> e1/2 to 1/4
> e2/1 to 2/4
>
> SWITCH B TRUNK Group1
> e1/2 to 1/4
> e2/1 to 2/4
>
>
> VLAN 2 contains tagged ports and untagged ports and IP Subnet voice traffic
>
> SWITCH A TRUNK Group2
> e1/5 to 1/8
> e2/5 to 2/8
>
> SWITCH B TRUNK Group2
> e1/5 to 1/8
> e2/5 to 2/8
>
> Thank you
> Gary
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20100319/32f74dd7/attachment.html>