[f-nsp] FastIron SuperX IPV6?

[Jose Madrid]

Thanks for the info Scott.  I appreciate the help.


On Thu, May 27, 2010 at 7:29 PM, Scott T. Cameron <routehero at gmail.com> wrote:
> You don't have the PREM6 EPROM/licence.
> You also need specific V6 hardware.
>
> --snip--
>   SW: Version 07.1.00T3e3 Copyright (c) 1996-2010 Brocade Communications
> Systems, Inc.
>       Compiled on May 05 2010 at 23:35:39 labeled as SXR07100
>       (3637745 bytes) Primary SXR07100.bin
>       BootROM: Version 04.0.00T3e5 (FEv2)
>       Serial  #:
>          License: SX_V6_HW_ROUTER_IPv6_SOFT_PACKAGE   (LID: )
>   HW: Chassis FastIron SuperX-PREM6 (PROM-TYPE SX-FIL3U-6-IPV6)
> --snip--
> 3: SX-FI624C 24-port Gig Copper             OK         24   001b.eda0.4f30
> S4:
> S5: SX-FI624C 24-port Gig Copper             OK         24   001b.eda0.4f60
> S6: SX-FI624C 24-port Gig Copper             OK         24   001b.eda0.4f00
> S7: SX-FI624C 24-port Gig Copper             OK         24   001b.eda0.4f00
> S8: SX-FI62XG 2-port 10G                     OK          2   001b.eda0.4f00
> S9: SX-FI12GM1-6 12-port Management          OK         12   001b.eda0.4fc0
> --snip--
> On Thu, May 27, 2010 at 7:14 PM, Jose Madrid <jmadrid2 at gmail.com> wrote:
>>
>> I have two Foundry FastIron SuperX's that are brand new and for some
>> reason I cant seem to get IPv6 working on them.  I do not have the
>> standard ipv6 unicast-routing command and don't know what exactly to
>> do.  I tried upgrading to the latest and greatest and still the same
>> thing.  Can anyone help me out? Were these devices not meant to do
>> IPV6?
>>
>> Output of show version:
>> sh version
>>  SW: Version 07.0.01cT3e3 Copyright (c) 1996-2010 Brocade
>> Communications Systems, Inc.
>>      Compiled on Apr 19 2010 at 17:38:49 labeled as SXR07001c
>>      (3445138 bytes) Primary /foundry/superx-7001c/SXR07001c
>>      BootROM: Version 05.0.00T3e5 (FEv2)
>>      Serial  #: SA50075114
>>  HW: Chassis FastIron SuperX-PREM (PROM-TYPE SX-FIL3U)
>> ==========================================================================
>> SL 9: SX-FI12GM1-4 12-port Management
>>      P-ASIC 16: type 00D1, rev D2  subrev 00
>> ==========================================================================
>>  400 MHz Power PC processor 8245 (version 129/1014) 66 MHz bus
>>  512 KB boot flash memory
>> 16384 KB code flash memory
>>  256 MB DRAM
>> The system uptime is 1 minutes 39 seconds
>> The system started at 23:06:41 GMT+00 Thu May 27 2010
>>
>> The system : started=warm start   reloaded=by "reload"
>>
>> (config)#ipv6
>>  access-list               Build ipv6 access lists
>>  cache-lifetime            Set IPv6 cache aging lifetime
>>  destination-unreachable   enable destination unreachable icmp packet to
>> be
>>                            sent
>>  dns                       Set DNS properties
>>  mld-snooping              Set MLD snooping globally
>>  neighbor                  Config static neighbor entries
>>  route                     Define static route
>>
>>
>> --
>> It has to start somewhere, it has to start sometime.  What better
>> place than here? What better time than now?
>> _______________________________________________
>> foundry-nsp mailing list
>> foundry-nsp at puck.nether.net
>> http://puck.nether.net/mailman/listinfo/foundry-nsp
>
>



-- 
It has to start somewhere, it has to start sometime.  What better
place than here? What better time than now?