[f-nsp] Not able to use XMR 10 gig linecard

[Remco Bressers]

Hi,

The other day, i inserted a brand new NI-XMR-10Gx4 in an XMR-4, but it
won't work correctly.
If i do a "show module", i see the following output on the slot :

S2: NI-XMR-10Gx4 4-port 10GbE Module  CARD_STATE_INTERACTIVE    20
0012.f2f5.d128
(S2: Configured as NI-XMR-1Gx20-SFP 20-port 1GbE/100FX Module)

What is the correct procedure to configure S2 as ni-xmr-10gx4 ?

I tried :

telnet at r(config)#module 2 ni-xmr-4-port-10g
Error: Please remove module from slot 2 first
telnet at r(config)#

Is this the only (and correct) way?

-- 
Kind regards,
Signet bv

Remco Bressers