[f-nsp] Not able to use XMR 10 gig linecard

[Niels Bakker]

* remco at signet.nl (Remco Bressers) [Tue 09 Nov 2010, 17:17 CET]:
>Unfortunately that won't work because of the same reason :
>
>telnet at ams-er8-sara(config)#no module 2 ni-xmr-20-port-1g
>Error: Please remove module from slot 2 first
>
>Also, powering off the card won't do.

You have to remove the card from the chassis, then enter that command, 
and re-insert the linecard.

As it's not booted this can be done without service interruption 
(assuming your cabling isn't a huge mess).


	-- Niels.

--