[f-nsp] [FastIron] RIP routes does not get into CAM

[Youssef Ghorbal]

>> M1 : 192.168.1.3/24 is in building A (with a default gateway on B)
>> M2 : 192.168.2.3/24 is in building A (with a default gateway on B)
>> M3 : 192.168.3.4/24 is in building A (with a default gateway on A)
>> M4 : 192.168.3.3/24 is in building A
>
> I'm assuming you have dot1q between A and B?

Yes, there is dot1q between A and B (it's vlan 128 for instance) this
vlan is configured as UNTAGGED on all physical ports.

> Do you not have a L3 interface on A in 192.168.1/24?

Nope, "A" does not have any ve interfaces in 192.168.1/24.

>> machine 1 -> A(L3) -> B(L3) -> A(L2) -> machine 2 is very very slow.
>> machine 1 -> A(L3) -> machine 2 is fast
>> machine 1 -> A(L3) -> B(L3) -> machine 2 is fast
>
> Where is machine 2 physically located - building A or building B?

In the case : machine 1 -> A(L3) -> B(L3) -> A(L2) -> machine 2 :
machine 2 is physically located in building A
In the case : machine 1 -> A(L3) -> machine 2 : machine 2 is in
building A or B (the result is the same)
In the case : machine 1 -> A(L3) -> B(L3) -> machine 2 : machine 2 is
physically located in building B

> Is the 50Mb/s pushing close to 100% on some port? Why is it only at 50Mb/s?

It's related to the transfer protocal and the disk speeds.

Youssef