[f-nsp] [MLX-16] CAM lookup very slow

[Niels Bakker]

* youssef.ghorbal at gmail.com (Youssef Ghorbal) [Mon 04 Oct 2010, 13:16 CEST]:
>On Mon, Oct 4, 2010 at 12:02 PM, Niels Bakker 
><niels=foundry-nsp at bakker.net> wrote:
>>Yes, IronWare is quite monolithic.  Try looking at what packets 
>>are traversing this linecard's CPU.
>
>How can I "look" at what packets are traversion this Linecard's CPU ?

debug packet capture


>>Did you configure hardware-assisted dropping of logged packets on 
>>interfaces on that module?
>
>I don't get your point here ? what do you mean exactly by 
>"hardware-assisted dropping of logged packets on interfaces"

For L2 ACLs, that'd be "mac access-list enable-deny-logging hw-drop"
not sure there's a L3 equiv. but the linecard console's messages point 
at traffic hitting an access list, so check your config.


	-- Niels.

--