[f-nsp] [MLX-16] CAM lookup very slow

[Youssef Ghorbal]

On Mon, Oct 4, 2010 at 1:50 PM, Niels Bakker
<niels=foundry-nsp at bakker.net> wrote:
> * youssef.ghorbal at gmail.com (Youssef Ghorbal) [Mon 04 Oct 2010, 13:16 CEST]:
>>
>> On Mon, Oct 4, 2010 at 12:02 PM, Niels Bakker
>> <niels=foundry-nsp at bakker.net> wrote:
>>>
>>> Yes, IronWare is quite monolithic.  Try looking at what packets are
>>> traversing this linecard's CPU.
>>
>> How can I "look" at what packets are traversion this Linecard's CPU ?
>
> debug packet capture

I was'nt aware of this command. Is it "safe" to run it on loaded
equipement ? or is it as a simple "tcpdump" on an *NIX machine ?
I was always looking for a packet capture facility...

Youssef Ghorbal