[f-nsp] Best practise for dual-stack IPv6 on Jetcore-based devices

[Mr. Dickerson]

Yes, 5.1 is MLX software. 5.1.0b is the latest available. 




________________________________
From: George B. <georgeb at gmail.com>
To: Arjan Van Der Oest <Arjan at voiceworks.nl>
Cc: "foundry-nsp at puck.nether.net" <foundry-nsp at puck.nether.net>
Sent: Mon, February 7, 2011 10:46:38 AM
Subject: Re: [f-nsp] Best practise for dual-stack IPv6 on Jetcore-based devices

5.1 is MLX/XMR code, is it not?  
These are BigIron ... or do they run the same code base?  I don't know as I 
don't run BI. But "JetCore" would tend to indicate ASIC and not FPGA.




On Mon, Feb 7, 2011 at 4:09 AM, Arjan Van Der Oest <Arjan at voiceworks.nl> wrote:

On 7Feb, 2011, at 11:36 , Mischa Peters wrote:
>
>> The only unfortunate thing is that VRRP-e doesn't support IPv6.
>
>As far as I know this was introduced in 5.1 and is my main reason to upgrade to 
>this version. Am I misinformed?
>
>--
>Met vriendelijke groet,
>
>Arjan van der Oest
>Senior Network & Systems Engineer / Security Officer
>
>Voiceworks BV - Editiestraat 29 - 1321 NG Almere
>Mobile : (+31) (0)36 7600 197
>Voiceworks winnaar Gouden FD Gazelle Award 2010 http://bit.ly/eksf8V
>
>
>_______________________________________________
>foundry-nsp mailing list
>foundry-nsp at puck.nether.net
>http://puck.nether.net/mailman/listinfo/foundry-nsp
>



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20110207/2685580a/attachment.html>