[f-nsp] Disable one port within trunk group

[Michiel Muhlenbaumer]

Hi Robert,

Get into the trunk config and disable the port there (disable et x/y).

Regards,
Michiel

On 6 jun 2011, at 11:45, Robert Hass wrote:

> Hi
> 
> I would like to disable 1 GE port which is assigned to trunk group
> (LAG currently consist 4 GE ports) but software reject entering into
> interface level:
> 
> telnet at lab-fcx(config)#int e1/1/5
> Error - cannot configure secondary ports of a trunk
> 
> Can I do this some way ?
> 
> My configuration:
> 
> interface ethernet 1/1/3
> port-name GE to TEST-6500
> load-interval 30
> spanning-tree 802-1w admin-pt2pt-mac
> no flow-control
> link-aggregate configure key 40000
> link-aggregate active
> pvst-mode
> !
> interface ethernet 1/1/4
> port-name GE to TEST-6500
> link-aggregate configure key 40000
> link-aggregate active
> pvst-mode
> !
> interface ethernet 1/1/5
> port-name GE to TEST-6500
> link-aggregate configure key 40000
> link-aggregate active
> pvst-mode
> !
> interface ethernet 1/1/6
> port-name GE to TEST-6500
> link-aggregate configure key 40000
> link-aggregate active
> pvst-mode
> !
> 
> telnet at lab-fcx#sh ver
>  Copyright (c) 1996-2010 Brocade Communications Systems, Inc.
>    UNIT 1: compiled on Sep 20 2010 at 22:46:47 labeled as FCXR07200
>                (5591177 bytes) from Secondary FCXR07200.bin
>        SW: Version 07.2.00T7f3
>  Boot-Monitor Image size = 369292, Version:07.1.00T7f5 (grz07100)
>  HW: Stackable FCX624
> 
> Robert
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp

---
Michiel Muhlenbaumer
Atrato IP Networks