[f-nsp] Multiple ISIS NETs on MLX

[Adam E Barratt (Sales Engineering)]

Hello,

Looking for a way to build multiple ISIS NETs on an MLX -- is this possible?

On a Cisco, you can separate ISIS into multiple processes and identify 
them on an interface by interface basis.  Is there anything like this on 
the MLX?

Any help is appreciated.

Version information below:
System Mode: MLX
Chassis: NetIron 4-slot (Serial #: A3SA38E015,  Part #: 35550-000B)
NI-X-SF  Switch Fabric Module 1 (Serial #: SA34093107,  Part #: 35548-102A)
FE 1: Type fe200,  Version 2
NI-X-SF  Switch Fabric Module 2 (Serial #: SA34093222,  Part #: 35548-102A)
FE 1: Type fe200,  Version 2
==========================================================================
SL M1: NI-MLX-MR Management Module Active (Serial #: SA36095086, Part #: 
35524-103D):
Boot     : Version 5.0.0T165 Copyright (c) 1996-2009 Brocade 
Communications Systems, Inc.
Compiled on Apr 19 2010 at 17:27:10 labeled as xmprm05000
  (517643 bytes) from boot flash
Monitor  : Version 5.0.0T165 Copyright (c) 1996-2009 Brocade 
Communications Systems, Inc.
Compiled on Apr 19 2010 at 17:26:42 labeled as xmb05000
  (517654 bytes) from code flash
IronWare : Version 5.0.0T163 Copyright (c) 1996-2009 Brocade 
Communications Systems, Inc.
Compiled on Apr 22 2010 at 13:08:54 labeled as xmr05000
  (6451650 bytes) from Primary
Board ID : 00 MBRIDGE Revision : 32
916 MHz Power PC processor 7447A (version 8003/0101) 166 MHz bus
512 KB Boot Flash (AM29LV040B), 32 MB Code Flash (MT28F128J3)
1024 MB DRAM
Active Management uptime is 209 days 17 hours 3 minutes 39 seconds
==========================================================================

Thanks!
Adam

-- 
Adam E Barratt
Sales Engineer
SOCKET
(573) 817-0000
abarratt at socket.net
1-800-SOCKET-3  www.socket.net
**********************************************************************
Privacy Notice: The information in this message is confidential and may be legally privileged. It is intended for use only by the individual or entity to which it is addressed. Access to this message by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful.  If you have received this e-mail in error please notify the sender immediately and delete it from your system without copying or forwarding.
**********************************************************************