[f-nsp] EdgeIron 4802CF POST: Switch Internal Loopback Test ... FAIL

[Raoul Bhatia [IPAX]]

hi,

almost all of my EdgeIron 4802CF show:

>  POST result:
> UART Loopback Test......................PASS
> Timer Test..............................PASS
> DRAM Test ..............................PASS
> I2C Initialization......................PASS
> Runtime Image Check ....................PASS
> PCI Device Check .......................PASS
> Switch Driver Initialization............PASS
> Switch Internal Loopback Test........... FAIL
> ------------------- DONE --------------------

even as it shows a failed status, the switch seems to work propoerly.

can anyone please explain the meaning of the "Switch Internal Loopback
Test"?

thanks,
raoul
-- 
____________________________________________________________________
DI (FH) Raoul Bhatia M.Sc.          email.          r.bhatia at ipax.at
Technischer Leiter

IPAX - Aloy Bhatia Hava OG          web.          http://www.ipax.at
Barawitzkagasse 10/2/2/11           email.            office at ipax.at
1190 Wien                           tel.               +43 1 3670030
FN 277995t HG Wien                  fax.            +43 1 3670030 15
____________________________________________________________________