[f-nsp] Graphing Brocade MLXe (and MLX and XMR?) IPv4 and IPv6 interface counters in Cacti

[Jeroen Wunnink]

Not really directly template related, but graphing IPv6 traffic in cacti 
can also be done by using sflow in your router, point it to nfsen 
(downloadable on sourceforge), making a inet6 filter in nfsen and 
writing the resulting .rrd files. You can use these in graph templates 
in cacti then, displaying IPv6 traffic.

On 5/12/11 4:27 AM, Frank Bulk wrote:
> Attached are some templates I created and then exported from Cacti that draw
> on Brocade's private MIB that expose the MLXe's IPv4 and IPv6 counters on a
> per physical interface basis.  This may be handy for those who want to
> create a baseline of IPv6 traffic before World IPv6 Day, both in term of
> absolute byte or packets, or in terms of percentage of traffic.
>    

-- 

Met vriendelijke groet,

Jeroen Wunnink,
EasyHosting B.V. Systeembeheerder
systeembeheer at easyhosting.nl

telefoon:+31 (035) 6285455              Postbus 48
fax: +31 (035) 6838242                  3755 ZG Eemnes

http://www.easyhosting.nl
http://www.easycolocate.nl