[f-nsp] Cam Partition Issue with Bi-RX

[Chuck Ufarley]

Hey Dave--

I'm not seeing any entries on an RX either.  I suspect this command isn't
supported, but I could be wrong.  Can anyone else confirm that the show cam
ip command works on an RX chassis?

--Chuck

On Thu, May 12, 2011 at 11:36 AM, Dave Peters <dave at terabitsystems.com>wrote:

>  Hi all--
>
> I've got a BI-RX-4 running the latest code, 2.703a, with an RX-BI24C on it,
> and when I rconsole onto the blade to look at the cam partition, I'm seeing
> zero entries, like so:
>
> LP-1>show cam ip 24 stat
> CAM IP statistics:      free entries    total entries
>            level1:      0              0
>
> Did it because I was experiencing some dropped packets.  A config tweak
> seemed to fix that, but I feel like I should still see something in the cam
> stats, since I've got traffic running through the card continuously.  Is
> there something I'm missing?  Is this a software bug, or am I using this
> command improperly?
>
> Thanks much for your help.
>
>
>
>
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20110516/29f196c2/attachment.html>