[f-nsp] Cam Partition Issue with Bi-RX

[Niels Bakker]

* markentime at gmail.com (Chuck Ufarley) [Mon 16 May 2011, 18:23 CEST]:
>I'm not seeing any entries on an RX either.  I suspect this command 
>isn't supported, but I could be wrong.  Can anyone else confirm that 
>the show cam ip command works on an RX chassis?

RX indeed has no CAM.  The closest equivalent is the next-hop table 
(as a resource that can run out).


	-- Niels.

--