[f-nsp] Cam Partition Issue with Bi-RX

[Dunc]

What happens when it does? I've been there with running out of CAM on
MLXes and things go a bit weird :/

Dunc



On 16/05/11 17:33, Niels Bakker wrote:
> * markentime at gmail.com (Chuck Ufarley) [Mon 16 May 2011, 18:23 CEST]:
>> I'm not seeing any entries on an RX either.  I suspect this command
>> isn't supported, but I could be wrong.  Can anyone else confirm that
>> the show cam ip command works on an RX chassis?
>
> RX indeed has no CAM.  The closest equivalent is the next-hop table (as
> a resource that can run out).
>
>
>     -- Niels.
>
________________________________
 This email and any attachments it may contain is confidential and solely intended for the use of the named addressee(s) only. Any views or opinions presented are solely those of the author and do not necessarily represent those of The Bunker. If you are not the intended recipient, be advised that you have received this email in error and that you should not rely on it or take any action based on it. You should not publish, use, disseminate, print, forward or copy this email as it is strictly prohibited. Please contact the sender if you have received this email in error and destroy it.