[f-nsp] Using IPv6 OSPF on FESX448-PREM

[Nick Gray]

Greetings!

I am having a little bit of trouble finding information about ipv6 layer 3
functions on the FESX448-PREM.

It seems that there is a very basic IPv6 function included in my current
software image. Does anyone have any additional information on how to
enable IPv6 OSPF support on this router?

#show version
  SW: Version 04.3.00T3e3 Copyright (c) 1996-2008 Foundry Networks, Inc.
      Compiled on Nov 14 2008 at 15:23:55 labeled as SXR04300
      (3162252 bytes) from Primary SXR04300.bin
      BootROM: Version 04.0.00T3e5 (FEv2)
  HW: Stackable FESX448+2XG-PREM (PROM-TYPE FESX448-L3U)
==========================================================================
      Serial  #: FL37051814
      P-ASIC  0: type 00D1, rev D1  subrev 00
      P-ASIC  1: type 00D1, rev D1  subrev 00
      P-ASIC  2: type 00D1, rev D2  subrev 00
      P-ASIC  3: type 00D1, rev D2  subrev 00
      P-ASIC  4: type 01D1, rev 00  subrev 00
      P-ASIC  5: type 01D1, rev 00  subrev 00
==========================================================================
  300 MHz Power PC processor 8245 (version 129/1014) 66 MHz bus
  512 KB boot flash memory
16384 KB code flash memory
  128 MB DRAM

telnet at ----(config-if-e10000-50)#ipv6
  ipv6                          IPv6 parameters
  ipv6-multicast-disable        Disable IPv6 PIM and vlan MLD snooping on
this
                                port
telnet at ----(config-if-e10000-50)#ipv6
  address           Assign IPv6 address to this interface
  enable            Enable IPv6 on this interface


If anyone has any information, please let me know.

Thanks!

Nick
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20121212/27806fcf/attachment.html>