[f-nsp] Specifying an LSP within a VLL

[James Paussa]

On 10/02/2012 12:03 AM, Eric Helm wrote:
> "You can optionally specify a Class of Service (COS) setting for the
> VLL. If a COS value is set, the device selects a tunnel LSP that also
> has this COS value, if one is available. If no tunnel LSP with this COS
> value is available, the device selects a tunnel LSP with the highest
> configured COS value (although never higher than the COS setting for the
> VLL)."
>
>
> /Eric
Somehow I had missed the last part in all the docs: '(although never 
higher than the COS setting for the VLL)'. Thanks for the tip.

-James.