[f-nsp] QinQ on FLS

[Robert Hass]

Hi

I have two switches, one is Cisco 6500, second is Brocade FLS624. Both
are interconnected by 10GE link and I have to enable on both switches
single GE port with QinQ.

I tried to configure:

! 0/4/1 - uplink to Cat6500
! 0/1/1 - GE port to Customer
!
vlan 100
 tagged e0/4/1
 untagged e0/1/1
!
tag-type 9100 ethe 0/1/1

But it applied tag-type to all ports on the switch - which is not what I want.

Is below configuration allow me to configure Q-in-Q to individual
ports on FLS624 ? :

vlan 100
 tagged e0/4/1
 untagged e0/1/1
!
tag-profile 9100
interface ethe 0/1/1
 tag-profile enable

BTW. What is difference between super-aggregated-VLAN and Q-in-Q using
tag-type/tag-profile ?

Rob