[f-nsp] FWS24 QinQ?

[Clayton Zekelman]

On a FESX424, the command would be:

tag-type 9100 ethe 13 to 24

Did you try that on the FWS?

At 08:41 AM 03/05/2012, Tamas Csillag wrote:
>On 05/03/2012 02:34 PM, Eric Helm wrote:
>>
>>
>>On 5/2/2012 4:16 PM, Tamas Csillag wrote:
>>>Dear All,
>>>
>>>After exploring the possibilities of my FWS24 (kinda old, I know), I
>>>found these options:
>>>
>>>    aggregated-vlan        support for larger Ethernet frame up to 
>>> 1530 bytes
>>>    tag-type               Customize value used to indicate tagged VLAN port
>>>
>>>Does this mean that this baby supports Q-in-Q?
>>>
>>>Also, does anybody have an older FastIron config guide? Most stuff I can
>>>dig up is for the FWS624 and other newer switches.
>>
>>You can do it with the tag-type command. A caveat on the FastIron
>>platform is that command applies to a port region, not just a single
>>port. Port regions on those are 1-12 and 13-24 I believe.
>>
>>/Eric
>
>That's what I gathered from the Fastiron config guides too, but the 
>command does not take an interface as an argument, just the integer, like:
>tag-type <number> <cr>
>
>So I assume it's for the whole system, then?
>
>Tamas
>
>_______________________________________________
>foundry-nsp mailing list
>foundry-nsp at puck.nether.net
>http://puck.nether.net/mailman/listinfo/foundry-nsp

---

Clayton Zekelman
Managed Network Systems Inc. (MNSi)
3363 Tecumseh Rd. E
Windsor, Ontario
N8W 1H4

tel. 519-985-8410
fax. 519-985-8409