[f-nsp] Cannot ping VRRP IP when backup active

[Niels Bakker]

* sraymond at acedatacenter.com (Steven Raymond) [Mon 14 May 2012, 22:22 CEST]:
>Two routers, MLXe, simple VRRP configuration.  The master has my .1 
>address, and all works fine, If I shutdown the VE interface on the 
>master for testing, in a few seconds routing resumes on the VE 
>interface of my backup router.  However, I never can ping the same 
>.1 address while the backup router is active.  Re-enable the master 
>VE interface and I can ping .1 again, and of course the hosts are 
>still happy.

Add 'ip address 10.99.99.1/22 secondary' to the backup router's ve205 
for that.


	-- Niels.

--