[f-nsp] SSH from NetIron XMR?

[Youssef Bengelloun-Zahr]

Hello,

I'm fairly new to the Brocade platforms but it seems that you have to copy
the public keys between each involved boxes to be able to use SSH. I seem
to recall having read that somewhere in the NetIron Unified Config Guide.

It's been my experience so far for MLXe / CER-RT under 5.3.0.x et 5.4.0.a.

My 2 cents.

Y.



2012/11/13 <Vinny_Abello at dell.com>

>  Hello,****
>
> ** **
>
> It’s extremely obvious that it’s possible to initiate a telnet session
> from a NetIron XMR, but I didn’t see a way to do the same for SSH. Is there
> any SSH client functionality at all on this platform? I’m leaning towards
> no, but will happily stand corrected.****
>
> ** **
>
> I’m currently on Ironware 5.1 if it makes any difference.****
>
> ** **
>
> Thanks in advance!****
>
> ** **
>
> -Vinny****
>
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp
>



-- 
Youssef BENGELLOUN-ZAHR
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20121113/d70fd90f/attachment.html>