[f-nsp] Tagged interfaces

[Eric A Louie]

I'm preparing to translate some Foundry configurations to Cisco.
 
As far as I can tell, the tagged interfaces are really just 802.1q trunk ports.  
Is that an accurate assessment?
 
Foundry allows multiple IP addresses on the Ethernet interface.  Do I have a 
choice to use vlan interfaces and/or Ethernet sub-interfaces on the Cisco to 
provide the same functionality?

 Much appreciated,
Eric Louie
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20121004/859db922/attachment.html>