[f-nsp] Help with setting up a Brocade FESX448 - PREM

[Eric Chen]

Sorry config got cut off

 

FESX448 Router(config-vif-2)#show config

!

Startup-config data location is flash memory

!

Startup configuration:

!

ver 07.2.02fT3e3

!

!

!

!

vlan 1 name DEFAULT-VLAN by port

!

vlan 2 by port

untagged ethe 1 to 48 

 router-interface ve 2

!

!

!

!

!

!

!

ip route 0.0.0.0 0.0.0.0 HOST GATEWAT IP

!                                                                 

interface ve 2

ip address HOST IP 255.255.255.192

!

!

!

!

!

!

!

!

!

end

 

Thank you,

Eric

 

From: foundry-nsp-bounces at puck.nether.net
[mailto:foundry-nsp-bounces at puck.nether.net] On Behalf Of Eric Chen
Sent: Sunday, September 09, 2012 12:27 AM
To: foundry-nsp at puck.nether.net
Subject: Re: [f-nsp] Help with setting up a Brocade FESX448 - PREM

 

All - below is the config output - we have 2 gigabit uplinks from provider.
I've done the below but for some reason am not about to ping out . 

 

Also if I want a separate private VLAN with its own IPs - how do we set that
up? I assume just  (vlan 3, router-interface 3, int ve 3 and then add IPs?
Do we need to route it?)

 

show config

!

Startup-config data location is flash memory

!

Startup configuration:

!

ver 07.2.02fT3e3

!

!

!

!

vlan 1 name DEFAULT-VLAN by port

!

vlan 2 by port

untagged ethe 1 to 48 

 router-interface ve 2

!

!

!

!

!

!

!

ip route 0.0.0.0 0.0.0.0 PROVIDER GATEWAT

 

Thank you,

Eric

 

From: foundry-nsp-bounces at puck.nether.net
[mailto:foundry-nsp-bounces at puck.nether.net] On Behalf Of Eric Chen
Sent: Wednesday, September 05, 2012 4:08 AM
To: foundry-nsp at puck.nether.net
Cc: billy at fusionity.com
Subject: [f-nsp] Help with setting up a Brocade FESX448 - PREM

 

Hi,

 

We're looking to setup a Brocade FESX448 - PREM. We have 2 drops from our
provider and have plugged them into ports 1 and 2. I've created a vlan 2 and
a ve 1 and tagged the ports 1 and 2 to vlan 2 and created spanning tree. But
the ports simply will not ping from the external IP . any ideas?

If anyone has a walkthrough / step-by-step of setup, it'd be much
appreciated

 

Thank you,

Eric

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20120909/0f4323c1/attachment.html>