[f-nsp] Possible to configure encrypted ospfv3 between Brocade and Cisco?

[David Hubbard]

I'm wondering if anyone has a working ospfv3 setup
between a Cisco and Brocade device?  As best I can
tell, Brocade's only possible setup is either no
auth and no encryption, or, sha1 auth, sha1 encryption,
esp packets.

On the Cisco side, the only option that gives you
esp packets is "ipv6 ospf encrypt" but then
unfortunately while it does support sha1 for the
authentication, the only encryption algorithms offered
are 3des, aes-cbc, des and null, so there's not a
compatible combination.

Thanks,

David

[cross posted to cisco-nsp list]