[f-nsp] RX-BI-4XG in reboot loop

[Aaron Wendel]

Seen it.  A couple weeks ago.  It's a hardware issue.  You'll need to replace the card.

Aaron

On Apr 16, 2013, at 2:28 PM, Rens Ariens - YISP <rens at yisp.nl> wrote:

> Hello everyone, 
> 
> We have a RX-BI-4XG module in a reboot loop. Reloaded boot/monitor/ironware images to it, but does not help. In rconsole       on boot i see the following not very promising information: 
> 
> Error: 0x08040001 - error in fap10m_i2c_write(): Cannot access chip (0x2061b8e8,0xc0010000,0x400000f0,0x00000004,0x00000000,0x00000000) 
>    Name: SAND_GEN_ERR: General error code (unspecified). 
> Error: 0x08040001 - error in fap10m_eci_write(): Cannot access chip (0x2061b8e8,0xc0010000,0x400000f0,0x00000004,0x00000000,0x00000000) 
>    Name: SAND_GEN_ERR: General error code (unspecified). 
> Error: 0x0844003c - General error in sand_mem_write() (0x0000000b,0x400000f0,0x00000004,0x00000000,0x00000000,0x00000000) 
>    Name: SAND_MEM_WRITE_006: Procedure sand_mem_write() reports: 
> Failed to write to the chip 
> Error: 0x180c003c - error in fap10m_mem_write() (0x00000001,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000) 
>    Name: SAND_MEM_WRITE_006: Procedure sand_mem_write() reports: 
> Failed to write to the chip 
> i2c time out 
> i2c write addr 000000e2 failed 
> i2c time out 
> 
> Anyone seen this before? Fixable or hardware issue? 
> 
> Thanks in advance, 
> 
> Rens 
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20130416/3a12d593/attachment.html>