[f-nsp] RX-BI-4XG in reboot loop

[Matt Kassawara]

I'd bet on hardware issue based on the error messages.  Did you try
reinstalling the module?


On Tue, Apr 16, 2013 at 1:28 PM, Rens Ariens - YISP <rens at yisp.nl> wrote:

>  Hello everyone,
>
> We have a RX-BI-4XG module in a reboot loop. Reloaded
> boot/monitor/ironware images to it, but does not help. In rconsole on boot
> i see the following not very promising information:
>
> Error: 0x08040001 - error in fap10m_i2c_write(): Cannot access chip
> (0x2061b8e8,0xc0010000,0x400000f0,0x00000004,0x00000000,0x00000000)
>    Name: SAND_GEN_ERR: General error code (unspecified).
> Error: 0x08040001 - error in fap10m_eci_write(): Cannot access chip
> (0x2061b8e8,0xc0010000,0x400000f0,0x00000004,0x00000000,0x00000000)
>    Name: SAND_GEN_ERR: General error code (unspecified).
> Error: 0x0844003c - General error in sand_mem_write()
> (0x0000000b,0x400000f0,0x00000004,0x00000000,0x00000000,0x00000000)
>    Name: SAND_MEM_WRITE_006: Procedure sand_mem_write() reports:
> Failed to write to the chip
> Error: 0x180c003c - error in fap10m_mem_write()
> (0x00000001,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000)
>    Name: SAND_MEM_WRITE_006: Procedure sand_mem_write() reports:
> Failed to write to the chip
> i2c time out
> i2c write addr 000000e2 failed
> i2c time out
>
> Anyone seen this before? Fixable or hardware issue?
>
> Thanks in advance,
>
> Rens
>
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20130416/ec5b4d08/attachment.html>