[f-nsp] RX-BI-4XG in reboot loop

[Josh Farrelly]

Looks to me like a good candidate for a hardware issue. If a power off/power on and reload of firmwares don't resolve it's usually quite broken.

Regards,

JF


From: Rens Ariens - YISP <rens at yisp.nl<mailto:rens at yisp.nl>>
Date: Wednesday, 17 April 2013 7:28 AM
To: "foundry-nsp at puck.nether.net<mailto:foundry-nsp at puck.nether.net>" <foundry-nsp at puck.nether.net<mailto:foundry-nsp at puck.nether.net>>
Subject: [f-nsp] RX-BI-4XG in reboot loop

Hello everyone,

We have a RX-BI-4XG module in a reboot loop. Reloaded boot/monitor/ironware images to it, but does not help. In rconsole on boot i see the following not very promising information:

Error: 0x08040001 - error in fap10m_i2c_write(): Cannot access chip (0x2061b8e8,0xc0010000,0x400000f0,0x00000004,0x00000000,0x00000000)
   Name: SAND_GEN_ERR: General error code (unspecified).
Error: 0x08040001 - error in fap10m_eci_write(): Cannot access chip (0x2061b8e8,0xc0010000,0x400000f0,0x00000004,0x00000000,0x00000000)
   Name: SAND_GEN_ERR: General error code (unspecified).
Error: 0x0844003c - General error in sand_mem_write() (0x0000000b,0x400000f0,0x00000004,0x00000000,0x00000000,0x00000000)
   Name: SAND_MEM_WRITE_006: Procedure sand_mem_write() reports:
Failed to write to the chip
Error: 0x180c003c - error in fap10m_mem_write() (0x00000001,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000)
   Name: SAND_MEM_WRITE_006: Procedure sand_mem_write() reports:
Failed to write to the chip
i2c time out
i2c write addr 000000e2 failed
i2c time out

Anyone seen this before? Fixable or hardware issue?

Thanks in advance,

Rens
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20130416/bd3522e4/attachment.html>