[f-nsp] Configuring Console Speed on MLXe

[Wilbur Smith]

Hi Matthias,
Our devices only run at the standard VTY100 9800 bps; we don't support changing this to a lower or higher setting.

All the technical bits on the serial console are actually in the device's hardware install guide (not our config guides). We try to keep folks on their tows :) 

What terminal server are you using? Minicom or Terraterm? Have you tried adjusting the speed on the terminal server end? 

Wilbur

Sent from my iPad

> On Dec 6, 2013, at 6:04 AM, "Matthias Cramer" <matthias.cramer at iway.ch> wrote:
> 
> Hi All
> 
> I feel somewhat stupid at the moment... I searched on the web and in Brocades documentation for an hour now,
> but can find no hint in how to change the speed of the serial console.
> 
> Can anyone help me with this ?
> 
> Regards
> 
>  Matthias
> 
> 
> -- 
> Matthias Cramer / mc322-ripe   Senior Network & Security Engineer
> iway AG                        Phone +41 43 500 1111
> Badenerstrasse 569             Fax   +41 44 271 3535
> CH-8048 Zürich                 http://www.iway.ch/
> GnuPG 1024D/2D208250 = DBC6 65B6 7083 1029 781E  3959 B62F DF1C 2D20 8250
> 
> <signature.asc>
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp