[f-nsp] STP BPDU filtering

[Robert Hass]

int ethe 12/8
 no spanning-tree



On Sat, Dec 14, 2013 at 2:12 PM, Alexander Shikoff <minotaur at crete.org.ua>wrote:

> Hi,
>
> Recently I noticed that my Brocade MLXe-16 does not drop STP BPDU packets
> even if 'spanning-tree protect' is configured in port-configuration:
>
> telnet at lsr1-gdr.ki#show int eth 12/8
> 10GigabitEthernet12/8 is up, line protocol is up
>   STP Root Guard is disabled, STP BPDU Guard is enabled
>                              ^^^^^^^^^^^^^^^^^^^^^^^^^^^
>
> But there are a lot STP BPDUs coming in that port, and moreover they
> are forwarded to all other ports within one VLAN.
> Generally, I need just to drop all incoming STP BPDUs on all ports,
> and nothing else. Any hints? Thanks in advance!
>
> --
> MINO-RIPE
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20131214/04626748/attachment.html>