[f-nsp] Loading code on XMR before reload

[Frank Bulk]

I've been burned too many times over the years with products where
uploading/copying code shouldn't have caused a problem, but did.    Unless
I'm willing to accept a service interruption, I now upload/copy code during
the maintenance window, or a day before.

 

Frank

 

From: foundry-nsp [mailto:foundry-nsp-bounces at puck.nether.net] On Behalf Of
Darren O'Connor
Sent: Monday, July 29, 2013 1:58 PM
To: Josh Galvez; foundry-nsp at puck.nether.net
Subject: Re: [f-nsp] Loading code on XMR before reload

 

I've had an issue in the past where BFD sessions flapped when uploading the
fpga code. Another time it didn't. YMMV

  _____  

Date: Mon, 29 Jul 2013 12:25:27 -0600
From: josh at zevlag.com <mailto:josh at zevlag.com> 
To: foundry-nsp at puck.nether.net <mailto:foundry-nsp at puck.nether.net> 
Subject: [f-nsp] Loading code on XMR before reload

I'm upgrading from 5.1 to 5.4 and I would like to perform the upgrade
procedure and load the code on my XMR's several hours or even a day or two
before I actually perform the reload to start running this new code.  That
way instead of the 20 minute long TFTP process at midnight, I have just the
2 minute reload.

 

Has anyone had any problems or concerns doing this?

 

-Josh


_______________________________________________ foundry-nsp mailing list
foundry-nsp at puck.nether.net <mailto:foundry-nsp at puck.nether.net>
http://puck.nether.net/mailman/listinfo/foundry-nsp

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20130729/aaf7eec2/attachment.html>