[f-nsp] Optical monitoring on Skylane transceivers

Ivan Lago futhwo at gmail.com
Tue Jun 18 09:02:28 EDT 2013


Hi

I have a problem with some SFP+ and XFP transceivers, manifactured by
Skylane, i installed on some FCX and ICX switches.
I need to monitor signal strength and temperature, but even if I enabled
optical monitor on the interface, the show optic command gives me an empty
output.
In the switch syslog, I see an error recurring every 3 minutes (the default
monitoring schedule):

SYSTEM: Optic is not Brocade qualified (port 1/3/1).

I am sure that the transceivers support DDM, is there a way to tell the
switches to ignore the manufacturer and just use the standard DDM/DOM
features to monitor the transceivers?

Thanks
Futhwo
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20130618/2e4b13bd/attachment.html>


More information about the foundry-nsp mailing list